Krone 870 HDP Скачать руководство пользователя страница 44

Страница: 44 / 568

Safety

Pos: 51.1 /Überschriften/Überschriften 2/P-T/SSicherheitsausstattung @ 17\mod_1236613960651_78.docx @ 205812 @ 2 @ 1

3.7

Safety Equipment

Pos: 51.2 /Überschriften/Überschriften 3/A-E/A/Aufstiegslei ter @ 17\mod_1236246728956_78.docx @ 203788 @ 3 @ 1

3.7.1

Ladder

Pos: 51.3 /BA/Sicher heit/Aufstiegslei ter/Aufsti egsleiter BiG Pack Bild 870 Baur eihe @ 338\mod_1430738779146_78.docx @ 2564592 @ @ 1

BPHS0266_1

Fig. 6

Pos: 51.4 /BA/Sicher heit/Aufstiegslei ter/Aufsti egsleiter BiG Pack T ext @ 17\mod_1236249494878_78.docx @ 203912 @ @ 1

There is a ladder (1) on the left side of the machine at the rear next to the baling channel that

can be used, among other things, for maintenance work on the knotting mechanism.

Pos: 51.5 /Überschriften/Überschriften 3/F-J/FF euerlöscher @ 17\mod_1236247698456_78.docx @ 203839 @ 3 @ 1

3.7.2

Fire extinguisher

Pos: 51.6 /BA/Sicher heit/Feuerlöscher/Feuerlöscher Big Pack Bil d H S Baurei he @ 62\mod_1299480241001_78.docx @ 571585 @ @ 1

BPHS0008

Fig.7

Pos: 51.7 /BA/Sicher heit/Feuerlöscher/Feuerlöscher Text BiG Pack @ 62\mod_1299479944306_78.docx @ 571558 @ @ 1

The machine is equipped with a fire distinguisher (1) ex works.

The fire extinguisher (1) is at the front of the drawbar on the left when facing in the direction of

travel.

Pos: 51.8 /BA/Sicher heit/Feuerlöscher/Feuerlöscher allgemeiner T ext @ 17\mod_1236248193988_78.docx @ 203864 @ @ 1

• Place the fire extinguisher (1) in the provided position on the machine before start-up

Have the fire extinguisher registered. This is the only way to ensure that all the required

inspections (every two years) will be performed.

The inspection intervals may differ from one country to another. In this case, the instructions on

the fire extinguisher of the respective countries shall be applicable.
• Follow the instructions of the respective countries

Pos: 51.9 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Содержание 870 HDP

























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 870 HDP

Отзывы:

Krone 870 HDP, Оригинальная инструкция по эксплуатации, Страница: 44 / 568

Результаты поиска

Содержание 870 HDP

Отзывы: