Kantronics KPC-9612 Plus, Руководство пользователя

Страница: 335 / 348

Waiting ACK and device busy
Your TNC has sent a packet to another station and is waiting for the ac-
knowledgment, but your TNC is not able to accept any data from the radio at
this time.
Waiting ACK and remote busy
Your TNC has sent a packet to another station and is waiting for the ac-
knowledgment, and the remote TNC is not able to accept any data from the
radio at this time.
Waiting ACK and both devices busy
Your TNC has sent a packet to another station and is waiting for the ac-
knowledgment, but neither your TNC nor the other station’s TNC is able to
accept any data from the radio at this time.
Waiting acknowledgment
You have sent a packet of data to another station, and your TNC is waiting
for the acknowledgment.
MESSAGES WOULD BE LOST
This message indicates that you have attempted to set the PBBS size too
small to hold all of the existing messages in the mailbox. The size is not
changed, and therefore no messages are lost. If you want to make the mail-
box smaller, you must first delete some of the messages or set the PBBS to 0,
erasing all of the messages, then set the new PBBS size.
NO KNOWN NODES
An NDHEARD list has been requested and the TNC has not heard any other
nodes (e.g., KA-Nodes).
NOT ENOUGH RAM
This message indicates that you have attempted to set the NUMNODES,
MAXUSERS, or PBBS to a value which requires more RAM memory than is
currently available. It may also occur if you try to enable the MYREMOTE
and there isn’t enough memory left.
Not while connected
Some parameters cannot be changed if the TNC is connected to another sta-
tion. This message is printed if an attempt is made.
Messages from the KPC-9612 Plus Appendix E: Additional Information
KPC-9612 Plus v 8.2 319 User’s Guide