Kantronics KPC-9612 Plus Скачать руководство пользователя страница 233

Страница: 233 / 348

When OFF, the custom connect text stored in CTEXT will not be sent to the con-

necting station upon receiving a connect request. When ON, the custom CTEXT

string will be sent. When CMSG is set to DISC, the custom CTEXT string will

be sent to the connecting station, and then your TNC will disconnect from that

station. If set to PBBS, the custom CTEXT string will be sent to the connecting

station, and then the connection will automatically be transferred to your PBBS.

If the PBBS is not available, your TNC will disconnect from the station.

See also:

ctext, pbbs

COMMAND

(n = $00 - $FF)

default $03 <Ctrl+C>
This command is used to change the Command Mode entry character. When

COMMAND is set to the default value, typing a <Ctrl+C> causes the TNC to re-

turn to Command Mode from packet Convers Mode. See CMDTIME for return-

ing to Command Mode from Transparent Mode.

CONLIST

[ON | OFF] [NONE | {+|-}callsign |

callsign1,callsign2...]

default OFF NONE
CONLIST is used to determine which stations (callsigns) may use your station

for ANY purpose, including digipeating.. When ON, the TNC will recognize

only those packets received with a callsign that appears in the CONLIST’s list of

callsigns; and you will not be able to connect to any station that is not in the

conlist. When OFF, the TNC will process all packets.
The maximum number of callsigns allowed in CONLIST is 10. Up to 10

callsigns may be entered at once, using the format shown after the command

name, and the new list of from 1 to 10 callsigns will replace whatever list was

there before. The CONLIST command can be used to add a single

callsign (+callsign), so long as there is room for the new callsign on the list

(if there is not, the TNC responds with “EH?” and returns you to the command

TNC Commands

Command Reference

KPC-9612 Plus v 8.2

217

User’s Guide

Содержание KPC-9612 Plus





























































































































































































































































































































































Результаты поиска

Содержание KPC-9612 Plus

Отзывы:

Kantronics KPC-9612 Plus, Руководство пользователя, Страница: 233 / 348

Результаты поиска

Содержание KPC-9612 Plus

Отзывы: