Kantronics KPC-9612 Plus страница 6 Скачать руководство пользователя

Страница: 6 / 348

5. General.

This License Agreement constitutes the complete Agreement

between you and Kantronics.
The SOFTWARE and/or Documentation may not be exported or re-exported in

violation of any export laws or regulations of the United States of America or any

other applicable jurisdiction.
This Agreement shall be governed by and interpreted under the laws of the State

of Kansas, United States of America.
Use, duplication, or disclosure by the Government of the United States is subject

to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical

Data and Computer SOFTWARE clause of DFARS 252.227-7013.
Kantronics may in its sole discretion, provide you with upgrades of the SOFT-

WARE and/or Documentation if you have provided Kantronics your completed

Warranty registration with a copy of your receipt showing the amount you paid.
LICENSEE ACKNOWLEDGES HAVING READ AND UNDERSTOOD THIS

AGREEMENT AND AGREES TO BE BOUND BY ITS TERMS. LICENSEE

FURTHER AGREES THAT THIS AGREEMENT IS THE COMPLETE AND

EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN LICENSEE

AND LICENSOR AND SUPERSEDES ANY PROPOSAL OR PRIOR

AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICA-

TIONS RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT.
Any questions concerning this Agreement or any other matter relating to

Kantronics Company, Inc. products or business practices may be directed to:

Customer Service Department

Kantronics Company, Inc.

1202 E. 23rd Street,

Lawrence, KS 66046

License Agreement

User’s Guide

KPC-9612 Plus v 8.2

Содержание KPC-9612 Plus





























































































































































































































































































































































Результаты поиска

Содержание KPC-9612 Plus

Отзывы:

Похожие инструкции для KPC-9612 Plus

Бренды по названию

Популярные бренды

Kantronics KPC-9612 Plus, Руководство пользователя

Результаты поиска

Содержание KPC-9612 Plus

Отзывы:

Похожие инструкции для KPC-9612 Plus

Бренды по названию

Популярные бренды