Kantronics KPC-9612 Plus, Руководство пользователя

Страница: 276 / 348

ited by other functions that require memory (e.g. NUMNODES and
MAXUSERS). Changing the size of the PBBS memory allocation will not affect
the contents of the mailbox (messages will be preserved). If you attempt to set
the PBBS smaller than is required for existing messages you will receive the
message “Messages would be lost” and no change will be made to the mailbox
size. In this case to reduce the size of the mailbox you must first either kill some
of the messages or set PBBS 0 which will delete all messages; then set the new
size. Using the PBBS n command with n equal to the current size will renumber
the messages in the mailbox beginning with message number 1. If n is a different
size, the messages will not be renumbered. This command causes a soft reset if n
is different from its previous value.
See also: cmsg, mypbbs, pbheader, pblo, pbperson, ptext; PBBS section
PBFORWRD [bbscall [VIA call1,call2,...call8] ]
[port]
[EVERY | AFTER n]
default NONE EVERY 0
This command will cause your PBBS to attempt to initiate a forward of any eligi-
ble mail to another BBS system periodically. Any message in your PBBS which
contains an @BBS field and is not being HELD (H) or has not previously been
FORWARDED (F) is eligible for forwarding. If the keyword EVERY is used, the
PBBS will attempt to forward once every n hours. If you specify the keyword
AFTER, the PBBS will attempt to forward whenever a user disconnects from the
PBBS, and every n hours after that. Setting the time interval will cause the PBBS
to attempt to forward immediately.
After the PBBS has initiated a forward, it will also request a reverse forward if
PBREVERS is ON. Note that full-service BBS systems must be configured to al-
low your station to reverse forward mail to you.
Note: Your PBBS will not forward or reverse forward unless HTEXT is set.
See also: pbrevers,htext
Command Reference TNC Commands
User’s Guide 260 KPC-9612 Plus v 8.2