Kantronics KPC-9612 Plus, Руководство пользователя

Страница: 224 / 348

•
AN4, input (4), is intended for internal use.
•
AN5, input (5), is intended for internal use.
•
AN6, input (6), is intended for internal use. It reports the current status
of the internal CD for Port 2, which is either 0 (or near 0) for logic low
or 255 (or near 255) for logic high.
•
AN7, input (7), is intended for internal use. It reports the current status
of the external CD for Port 2, which is either 0 (or near 0) for logic low
or 255 (or near 255) for logic high.
See also: myremote
AUTOLF {ON | OFF}
default ON
When ON, a line feed is sent to the terminal after each carriage return. This pa-
rameter should be set on when overprinting occurs and the terminal being used
does not automatically supply its own linefeed after a carriage return. This com-
mand affects only the data sent to the terminal, not data sent to the radio.
See also: cr, lfadd
AX2512V2 {ON | OFF}
Multi-Port
default ON/ON
This command provides compatibility with all known packet units implementing
AX.25 protocol. When ON, Level 2 Version 2 protocol is implemented and the
TNC will automatically adapt to whichever version the connecting station is us-
ing. When OFF, Level 2 Version 1 is implemented. Set this command to OFF if
you need to digipeat through other units which do not digipeat version 2 packets.
You may also find benefit from setting this command OFF when using several
digipeaters (not nodes) to send packets, or when conditions are marginal between
Command Reference TNC Commands
User’s Guide 208 KPC-9612 Plus v 8.2