Kantronics KPC-9612 Plus, Руководство пользователя, Страница: 255 / 348

LFADD {ON | OFF}
default OFF
This formating command may be used to include automatically a line-feed char-
acter with each carriage return (CR) entered at the keyboard (in data mode). IF
LFADD is set ON, a line-feed character will be appended to each CR typed in
data mode.
LFSUP {ON | OFF}
default OFF
When ON, this formatting command suppresses any line-feed characters received
from the other station, relying on your terminal program to properly advance to
the next line. When OFF, the line-feeds received from the other station are not
suppressed but are sent to your terminal as received.
See also: autolf, crsup
LLIST [ON | OFF] [NONE | {+|-}callsign |
callsign1,callsign2...]
default OFF NONE
LLIST is used to determine which stations (callsigns) may NOT use your station
for ANY purpose, including digipeating. When LLIST is ON, the TNC will NOT
recognize those packets received with any callsign that appears in the LLIST’s
(lid) list of callsigns. In addition, when LLIST is ON, you will not be able to con-
nect to any station that is on that list.
The maximum number of callsigns allowed in LLIST is 10. Up to 10 callsigns
may be entered at once, using the format shown after the command name, and the
new list of from 1 to 10 callsigns will replace whatever list was there before. The
LLIST command can be used to add a single callsign (+callsign), so long as there
is room for the new callsign on the list (if there is not, the TNC responds with
“EH?” and returns you to the command prompt). Similarly, you can remove a
TNC Commands Command Reference
KPC-9612 Plus v 8.2 239 User’s Guide