Kantronics KPC-9612 Plus, Руководство пользователя, Страница: 278 / 348

PBLIST [ON | OFF] [NONE | {+|-}callsign |
callsign1,callsign2...]
default OFF NONE
The front panel of your TNC has a mail-status indicator that blinks when there
is unread mail in your PBBS addressed to your callsign (MYCALL) or to your
MYPBBS. And several PBBS commands (LISTMINE, READMINE, and
KILLMINE) operate on mail addressed to your callsign (MYCALL) or to
your MYPBBS.
PBLIST allows you to add up to ten more callsigns to the set of callsigns
included as “mine” for use with the “mail” indicator and the PBBS commands
(LISTMINE, READMINE, and KILLMINE). The PBLIST command has two
parameters: one for creating, changing, or deleting the list of callsigns on the
PBLIST and the other for turning ON or OFF the use of the callsigns on the cur-
rent PBLIST.
+ SSID’s attached to callsigns are always ignored in the mailbox.
The maximum number of callsigns allowed in PBLIST is 10. Up to 10 callsigns
may be entered at once, using the format shown after the command name, and the
new list of from 1 to 10 callsigns will replace whatever list was there before. The
PBLIST command can be used to add a single callsign (+callsign), so long as
there is room for the new callsign on the list (if there is not, the TNC responds
with “EH?” and returns you to the command prompt). Similarly, you can remove
a single callsign (-callsign) from the list. And to remove all items from the cur-
rent list, enter PBLIST NONE.
When you change PBLIST, the new list of callsigns takes effect immediately for use
with the PBBS commands (LISTMINE, READMINE, and KILLMINE). But the new
list will not be used with the mail-status indicator until after the next disconnect
from the PBBS or the next reset.
When PBLIST is ON, the callsigns on the current PBLIST list are included as
“mine” for use with the “mail” indicator and the PBBS commands (LISTMINE,
READMINE, and KILLMINE). Your callsign (MYCALL) and your MYPBBS
are also included as “mine” when PBLIST is ON.
Command Reference TNC Commands
User’s Guide 262 KPC-9612 Plus v 8.2