Kantronics KPC-9612 Plus Скачать руководство пользователя страница 190

Страница: 190 / 348

Configuring Three Digis Using the UIFLOOD Command

Here, three digis, with MYCALLs of A, B, and C, are configured with an alias of

WIDE, and UIDWAIT is set ON. For example station A’s UIFLOOD call is set

as follows:

cmd: UIFLOOD

wide,30,ID

The reporting station path is then set to GPS via WIDE4-4, and a UI packet is

launched. Any one of the stations monitoring will then display the resulting ac-

tion as follows:

NØGRG>GPS,WIDE4-4: <UI>:5

NØGRG>GPS,A*,WIDE4-3: <UI>:5

NØGRG>GPS,B*,WIDE4-3: <UI>:5

NØGRG>GPS,C*,WIDE4-3: <UI>:5

Note that all three digis see the UI frame addressed to GPS via WIDE4-4. They

then, in turn digipeat that frame, inserting and marking as digipeated (*) their

MYCALL, and include the new to- be-digipeated and decremented field of

WIDE4-3. Note that each digi hears the UI frames repeated by the others but

does not digipeat those in turn since a timeout of 30 seconds was specified by the

UIFLOOD command. See the command specification for details.

Configuring Three Digis Using the UITRACE Command

Here, three digis, with MYCALLs of A, B, and C, are configured with an alias of

TRACE; and UIDWAIT is set ON. For example station A’s UITRACE alias is

set as follows:

cmd: UITRACE TRACE

The reporting station path is then set to GPS via TRACE4-4, and a UI packet is

launched. Any one of the stations monitoring will then display the resulting ac-

tion as follows:

cmd:NØGRG>GPS,TRACE4-4: <UI>:5

NØGRG>GPS,B*,TRACE4-3: <UI>:5

NØGRG>GPS,A*,TRACE4-3: <UI>:5

NØGRG>GPS,B,A*,TRACE4-2: <UI>:5

NØGRG>GPS,C*,TRACE4-3: <UI>:5

NØGRG>GPS,B,C*,TRACE4-2: <UI>:5

Modes of Operation

GPS NMEA Interfacing Capability

User’s Guide

174

KPC-9612 Plus v 8.2

Содержание KPC-9612 Plus





























































































































































































































































































































































Результаты поиска

Содержание KPC-9612 Plus

Отзывы:

Kantronics KPC-9612 Plus, Руководство пользователя, Страница: 190 / 348

Результаты поиска

Содержание KPC-9612 Plus

Отзывы: