Kantronics KPC-9612 Plus Скачать руководство пользователя страница 189

Страница: 189 / 348

The reporting station path is then set to GPS via RELAY, WIDE, TRACE, and a

UI packet is launched.
Any one of the stations monitoring will then display the resulting action as fol-

lows:

cmd:NØGRG>GPS,RELAY,WIDE,TRACE: <UI>:5

NØGRG>GPS,B*,WIDE,TRACE: <UI>:5

NØGRG>GPS,A*,WIDE,TRACE: <UI>:5

NØGRG>GPS,B,A*,TRACE: <UI>:5

NØGRG>GPS,A,B*,TRACE: <UI>:5

NØGRG>GPS,C*,WIDE,TRACE: <UI>:5

NØGRG>GPS,B,C*,TRACE: <UI>:5

NØGRG>GPS,A,C*,TRACE: <UI>:5

NØGRG>GPS,B,A,C*: <UI>:5

NØGRG>GPS,A,B,C*: <UI>:5

NØGRG>GPS,C,A*,TRACE: <UI>:5

NØGRG>GPS,B,C,A*: <UI>:5

NØGRG>GPS,C,B*,TRACE: <UI>:5

NØGRG>GPS,A,C,B*: <UI>:5

NØGRG>GPS,C,A,B*: <UI>:5

NØGRG>GPS,C,B,A*: <UI>:5

All digis hear the first UI frame and store it. Due to the setting of UIDWAIT,

some stations may wait longer than others to digipeat; hence, when they do, they

may have several frames stored up - for example, the original and a digipeat from

another station. Trace station B as an example. It digipeats the original UI frame

from the “reporting station,” swapping its MYCALL for RELAY (B) and mark-

ing it (*), then repeats a frame from A and one from C, and, finally, repeats two

more (from A,C and C,A) — a total of five! Note that each repeater digis five

times so the total number of digipeated packets is 15!

GPS NMEA Interfacing Capability

Modes of Operation

KPC-9612 Plus v 8.2

173

User’s Guide

Содержание KPC-9612 Plus





























































































































































































































































































































































Результаты поиска

Содержание KPC-9612 Plus

Отзывы:

Kantronics KPC-9612 Plus, Руководство пользователя, Страница: 189 / 348

Результаты поиска

Содержание KPC-9612 Plus

Отзывы: