cmd:*** CONNECTED to NØKN-1
[KPC9612P-8.1-HM$]
5000 BYTES AVAILABLE
ENTER COMMAND: B,J,K,L,R,S, or Help>
+ The commands now shown as available are just for the mailbox. The
KPC-9612 Plus’s NEWUSER (and TERMINAL) commands become available
again when you exit the mailbox.
Step 4.
Now you can give any of the mailbox commands shown
(B,J,K,L,R,S, or Help). Later you will want to read the
“PBBS (Personal Mailbox) section of the “Modes of
Operation” chapter for more details.
If you now type the HELP command and press return,
you’ll see the KPC-9612 Plus mailbox help file and then
the standard mailbox prompt:
ENTER COMMAND: B,J,K,L,R,S, or Help> .
Step 5.
Now disconnect (just like you will disconnect from any
other user).
First, return to command mode by typing a <Ctrl+C> on
your keyboard. To do this, hold down the control key
(usually marked Ctrl) and type the letter C. Then let go
of the control key.
You should now see the “cmd:” prompt.
Next type the DISCONNE command and press return.
You will receive the message *** DISCONNECTED
and a new command prompt.
Congratulations. You have now completed your first connect.
Monitor Communications From Nearby Stations
A good way to start using your packet radio station is to monitor communications
from nearby stations.
Monitor Communications From Nearby Stations
KPC-9612 Plus v 8.2
101
User’s Guide
Содержание KPC-9612 Plus
