Kantronics KPC-9612 Plus, Руководство пользователя

Страница: 227 / 348

See also: delete, redisplay
BLT n {EVERY | AFTER} hh:mm:ss [START hh:mm:ss]
(n = 1 - 4)
Multi-Port
default EVERY 00:00:00 (for each of the 4 LT strings)/EVERY 00:00:00
(for each of the 4 LT strings)
This command (used with GPS) sets the interval between beacons for the
associated LT (Location Text) string.
n identifies which LT is used (1-4). If EVERY is specified, the LT will be trans-
mitted at the interval specified by the hh:mm:ss parameter. This is set in
hours:minutes:seconds, and all characters must be specified. If the optional key
word START is given followed by a time (in 24 hour format), the beacons will
not be transmitted until the specified time. The beacon will then be transmitted
according to the setting of the EVERY parameter. (NOTE: If the current time is
past the start time, the beacon will start at the next scheduled interval based on
the start time.)
If AFTER is specified, the beacon will be transmitted once after no activity is de-
tected on the channel for hh:mm:ss time. Selecting AFTER does not allow the
optional START parameter.
For example, setting BLT 3 EVERY 00:15:00 START 03:30:00 would cause the
third LT string (LT 3) to be transmitted every 15 minutes, with the first transmis-
sion each day occurring at 03:30:00.
BP96 {ON | OFF}
default OFF
When OFF, the high speed modem’s transmit waveform filter provides for the
best eye pattern on the transmitted signal. The transmitted bandwidth is slightly
wider than a G3RUH modem. When ON, the transmitted bandwidth is slightly
narrower than the G3RUH modem, and the transmitted eye pattern is slightly dis-
torted, but will work with most radios.
TNC Commands Command Reference
KPC-9612 Plus v 8.2 211 User’s Guide