Kantronics KPC-9612 Plus, Руководство пользователя

Страница: 230 / 348

characters input from the keyboard back to the last un-PASSed carriage return
(unless you are in Convers Mode, with CPACTIME turned ON and PACTIME
has expired).
See also: canpac, cpactime, pass
CANPAC n (n = $00 - $FF)
default $19 <Ctrl+Y>
This command is used to change the cancel-packet command character. When in
the Convers Mode entering a <Ctrl+Y> will cancel all keyboard input back to the
last unpassed SENDPAC character (unless CPACTIME is turned ON and
PACTIME has expired).
This character also functions as a cancel-output character in Command Mode.
Typing the cancel-output character a second time re-enables normal output. For
example, if you’ve told the TNC to do a DISPLAY, a <Ctrl+Y> will cancel the
display and a second one re-enables the cmd: prompt after the next “CR”.
See also: canline, cpactime, sendpac
CD {INTERNAL | EXTERNAL | SOFTWARE *}
Multi-Port
default INTERNAL/INTERNAL
* = “SOFTWARE” can only be used with port 1.
The CD command selects which carrier detect method will be used for a given
port.
For either port, set to INTERNAL, the TNC will detect a signal present on the
channel — using an energy type carrier detect — allowing shared voice and data
on the same channel.
For each port, set to EXTERNAL, the carrier detect is supplied by an external de-
vice, connected to the XCD pin on that radio port.
Command Reference TNC Commands
User’s Guide 214 KPC-9612 Plus v 8.2