Kantronics KPC-9612 Plus, Руководство пользователя

Страница: 63 / 348

Note: If you need further assistance on your radio cabling, contact the radio man-
ufacturer, your dealer, or a local amateur who has already installed a TNC.
Kantronics is not likely to have pin assignments for specific transceiver models.
The following diagrams, used for example only, show wiring connections be-
tween the male connector for the KPC-9612 Plus’s “Radio” port 1 and transceiv-
ers (including HTs) from three major manufacturers: Yaesu, Icom, and Kenwood.
+ These diagrams may also apply to transceivers from other manufacturers, but you
need to check to be sure how your transceiver needs to be wired. (See the section
on “Interfacing Hand-Held Radios” in the the “Advanced Installation” appendix
for further information.
[Yaesu diagrams — page G8]
Port 1: Connect to a Transceiver Installing Your KPC-9612 Plus
KPC-9612 Plus v 8.2 47 User’s Guide