Kantronics KPC-9612 Plus, Руководство пользователя

Страница: 290 / 348

When OFF, the stream indicator is displayed only when a change in streams oc-
curs. When ON, the stream indicator will be displayed with every incoming
packet. This command takes effect only when receiving those packets addressed
to you and MCON is OFF.
See also: mcon, monitor, streamca, streamsw
STREAMSW n (n = $00 - $FF)
default $7C (|)
This command selects the character to be used to signify that a new “stream” or
connection channel is being addressed. To change streams you must type this
streamswitch character followed immediately by the stream designator. The
stream designator is an alphabetic character A through Z, or a through z, limited
by the value of MAXUSERS.
If more than one port is active in the KPC-9612 Plus and you wish to change to a
stream on another port, you need to insert the port number between the
streamswitch character and the stream designator. For example, to switch from
stream C of the 1200 baud port (port 1) to stream B of the 9600 port (port 2), use
the character sequence “|2B”.
+ If STREAMSW is set to the dollar sign ($24) you will need to enter parameter
values in decimal. Alternatively, precede the $ with the PASS character in order
to enter hex numbers.
The character selected can be PASSed in the Convers Mode by using a special
PASS character, and will always be passed as data in the Transparent Mode. If
operating in the Transparent Mode and you wish to change streams, you must
first return to the Command Mode.
See also: maxusers, pass, status
Command Reference TNC Commands
User’s Guide 274 KPC-9612 Plus v 8.2