Kantronics KPC-9612 Plus, Руководство пользователя, Страница: 232 / 348

CMDTIME n (n = 0 - 15)
default 1
This command sets the time allowed for entry of required characters to exit the
Transparent Mode. In order to allow exit to Command Mode from Transparent
Mode, while permitting any character to be sent as data, a guard time of
CMDTIME seconds is set up.
Entering a value for “n” sets the value of CMDTIME to “n seconds”.
To exit Transparent mode, you need to wait at least CMDTIME since the last
data character was sent to the TNC. Then you need to enter the COMMAND
character (e.g., <Ctrl+C>)) three times, with a wait of LESS THAN the value of
CMDTIME between the first and second time you enter the COMMAND charac-
ter and also a wait of LESS THAN the value of CMDTIME between the second
and third time you enter the COMMAND character.
After a final delay of CMDTIME the TNC will exit Transparent Mode and enter
Command Mode. At this time you should see the cmd: prompt. If CMDTIME is
set to zero, the only exit from Transparent Mode is a modem break signal, assum-
ing BREAK is set to ON.
For example (if CMDTIME is 1 second and COMMAND is <Ctrl+C>): wait one
second, type a <Ctrl+C>, within one second type a second <Ctrl+C>, within one
second type a third <Ctrl+C>, WAIT one second, cmd: prompt should appear. If
your computer/program has the capability you can also send a modem break to
escape Transparent Mode.
See also: command, trans, break
CMSG {ON | OFF | DISC | PBBS}
Multi-Port
default OFF/OFF
Your TNC can send a custom connected text message (stored in CTEXT) to a
station making a connection request to your station. The CMSG command is
used to control whether this message is sent and, if so, what the TNC will do af-
ter sending the message.
Command Reference TNC Commands
User’s Guide 216 KPC-9612 Plus v 8.2