Kantronics KPC-9612 Plus, Руководство пользователя

Страница: 333 / 348

***FRMR received:
A frame reject packet has been received for an unknown reason. The infor-
mation field of this packet will display in hexadecimal value. This display
may be useful in determining why the receiving station rejected your packet.
***FRMR sent:
Frame reject packet has been sent due to a detected error in protocol. Three
bytes (6 hexadecimal characters) are displayed to assist in determining the
reason for the reject.
Input ignored
Since the TNC command interpreter was kept small and simple, it will some-
times change parameters before it completes parsing some of the more in-
volved commands. In some cases, options at the beginning of the command
will have been acted on before a syntax error near the end of the line is
reached. When this occurs, “Input ignored” is used to show what part of the
line was ignored. The dollar sign points to the boundary: characters to the left
were used; the character pointed to and those to the right were not, i.e., the
line was parsed as if a <CR> was entered at the $.
Example:
BUDLIST QST,KBØNYK NØKN
$
Input ignored
Because the comma is missing, the command is interpreted as if it were
BUDLIST QST,KBØNYK; the NØKN is ignored.
INVALID STREAM
The stream you have tried to change to is not valid. Port numbers must be
numbers 1 or 2. Stream designators must be letters A - Z. MAXUSERS sets
the upper limit on valid streams and which ports are valid.
KANTRONICS KPC9612P VERSION 8.2
(C) COPYRIGHT 1991-1997 BY KANTRONICS INC. ALL RIGHTS RESERVED.
DUPLICATION PROHIBITED WITHOUT PERMISSION OF KANTRONICS.
A message such as this (different for each product, but with this format) ap-
pears when the TNC is first turned on and after any soft reset, including
changing the NUMNODES, PBBS, MAXUSERS or MYREMOTE com-
mands, or issuing the RESET command.
Messages from the KPC-9612 Plus Appendix E: Additional Information
KPC-9612 Plus v 8.2 317 User’s Guide