Kantronics KPC-9612 Plus, Руководство пользователя

Страница: 282 / 348

PMODE {CMD | CONV | TRANS}
default CMD
The PMODE command controls the mode your TNC will be in when it is first
powered up or when reset. When set to CMD, the TNC will produce a sign-on
message followed by the command prompt. When set to CONV, the unit will be
in the Convers Mode. Setting PMODE TRANS sets the TNC in Transparent
Mode. Exiting Transparent Mode with three <Ctrl+C>s will put the TNC in
Command Mode.
PORT {1 | 2}
default 1
This command will select which port is active when the 9612 Plus is first turned
on, or when reset. Port 1 is the low-speed (1200 baud) port, and port 2 is the high
speed port. To change ports during operation, you must use the streamswitch
character.
See also: streamsw, hbaud
PTEXT text (up to 128 characters)
default (blank)
This entry specifies the customized text sent with the initial PBBS (personal
mailbox) sign-on message. Enter any combination of characters and spaces up to
a maximum length of 128. Entering a single “%” will clear PTEXT. Don’t use
the “>” character in your PTEXT, as this is reserved by BBS systems for their
prompt.
See also: pbbs
Command Reference TNC Commands
User’s Guide 266 KPC-9612 Plus v 8.2