Kantronics KPC-9612 Plus, Руководство пользователя

Страница: 48 / 348

•
which pins connect to which in the cabling between the KPC-9612 Plus
and each transceiver’s microphone or data jack.
Wiring diagrams for some common transceivers for low speed (i.e., 1200 baud)
operation are included later in this chapter for your assistance.
The Computer
Your KPC-9612 Plus can work with any computer that can communicate with it
through a standard RS-232C serial modem port.
Technical note: You need to be sure the wiring is as shown in the installation sec-
tion below. You may, of course, make your own cable; make sure it is correctly wired
and shielded.
To use your KPC-9612 Plus with “Pacterm”, the terminal communication soft-
ware that ships with the KPC-9612 Plus (on the 3.5 in. “Information and Pro-
gram” disk) you need the following:
•
Computer: A PC (IBM) compatible, XT or above
•
Operating System: MS-DOS or PC-DOS version 3.3 or higher
•
RAM (Random Access Memory): A minimum of 384 K
•
Disk drives: A 3.5 ” High Density (1.44MB) floppy drive
•
Hard drive: (optional) You do not need to use a hard drive with the
“Information and program” disk or other communication program. If you
want to gain speed and convenience by using your hard drive, be sure
you have enough space available to store the program used to
communicate with the KPC-9612 Plus and/or space to store the files you
want to use from the “Information and Program” disk.
•
Serial (COM) Port: The KPC-9612 Plus can communicate with the
computer using any serial (COM) port. The software used in the initial
installation of your system (i.e., Pacterm) uses COM2 by default or
COM1 if you wish. If you use other communication software, you can
use any COM port that your communication software supports.
Installing Your KPC-9612 Plus The Major Components of Your Station
User’s Guide 32 KPC-9612 Plus v 8.2