Kantronics KPC-9612 Plus, Руководство пользователя

Страница: 237 / 348

Mode, packets are sent at periodic intervals determined by PACTIME. Charac-
ters are sent periodically as in Transparent Mode but the local editing and echo-
ing features of Convers Mode are enabled.
See also: convers, cr, paclen, pactime, sendpac, trans
CR {ON | OFF}
default ON
When ON the SENDPAC character (normally carriage return) is appended to all
packets sent in Convers Mode except when PACLEN is exceeded. Setting CR
ON and SENDPAC $0D results in a natural conversation mode. Each line is sent
when a “CR” is entered and arrives at its destination with the “CR” appended to
the end of the line. To avoid overprinting, AUTOLF may need to be ON at the re-
ceiving end.
See also: autolf, lfadd, sendpac
CRSUP {ON | OFF}
default OFF
This command was added to the first multi-mode TNCs (such as the Kantronics
UTU and KAM) to accommodate the practice by radio teletype (RTTY) opera-
tors of adding an extra carriage return (CR) at the end of each line (i.e., CR, CR,
linefeed (LF) ). This was done to give the carriage of the old mechanical tele-
types time to return across the page. Some of these machines are still in use, so
we’ve retained this command so you can “correct” the data you might receive
from such a station. To do so, turn CRSUP ON. When ON, this command sup-
presses every other carriage return (when no data is between them) in the re-
ceived data before sending the data to the terminal. When CRSUP is OFF, all
carriage return characters are left in the received data as it is sent to the terminal.
See also: autolf, lfsup
TNC Commands Command Reference
KPC-9612 Plus v 8.2 221 User’s Guide