Kantronics KPC-9612 Plus, Руководство пользователя

Страница: 234 / 348

prompt). Similarly, you can remove a single callsign (-callsign) from the list.
And to remove all items from the current list, enter CONLIST NONE.
A callsign entered without a SSID will match any SSID of that callsign. To match
a specific SSID only, enter the callsign with that SSID: for example, callsign-n,
where n = 0-15.
CONMODE {CONVERS | TRANS}
default CONVERS
This command controls the mode the TNC will be placed in AUTOMATICALLY
after a connect if NOMODE is OFF. The connect may result either from a con-
nect request received or a connect request originated by a CONNECT command.
If the TNC is already in Convers or Transparent Mode when the connection is
completed, the mode will not be changed. If you have typed part of a command
line when the connection is completed, the mode change will not take place until
you complete the command or cancel the line input.
See also: canline, connect, convers, nomode, trans
#
CONNECT call1 [VIA call2,call3,...,call9]
immediate
This command it used to establish a link with another station in a “connected”
mode.
+ For more information on being “connected,” see the Modes of Operation chapter.
call1 = callsign of station to be connected to.
call2,...,call9 = optional stations to be digipeated through. A maximum of 8
digipeater addresses (callsigns or aliases) can be specified. This is referred to as a
path.
Each callsign may also have an optional Secondary Station Identifier (SSID)
specified as -n, where n = 1 - 15. The digipeat callsigns are specified in the order
in which they are to relay transmitted packets. The mode set by CONMODE will
Command Reference TNC Commands
User’s Guide 218 KPC-9612 Plus v 8.2