Kantronics KPC-9612 Plus, Руководство пользователя

Страница: 184 / 348

Other Notes
The LT buffers, LT beacons and LTRACK buffer can be used even without a
GPS unit attached. You can manually set the LT buffers to any text you want (up
to 128 characters total) using the LT command:
LT 1 This is ltext buffer number 1
The LT buffers will be transmitted based on the BLT and LTP commands and
stored according to the LTRACK command even when the TNC is not in GPS
Mode.
GPS Command Summary
The following GPS commands are listed here for convenience and explained in
detail in the Command Reference section.
BLT n {EVERY | AFTER} hh:mm:ss [START hh:mm:ss]
(n = 1 - 4)
This command sets the interval between beacons for the associated LT string.
GPSHEAD n string (n=1-4) (string up to 8 chars)
This command determines which GPS NMEA sentences will be stored in the LT
buffers.
GPSINIT string (string up to 128 characters)
This command establishes a string that will be sent to the attached GPS unit upon
power-up (i.e., initial text sent to terminal in GPS Mode).
Modes of Operation GPS NMEA Interfacing Capability
User’s Guide 168 KPC-9612 Plus v 8.2