Kantronics KPC-9612 Plus, Руководство пользователя, Страница: 120 / 348

Switch from Port 1 to Port 2
Up to now, we have assumed you are using port 1. Switching to port 2 (and a par-
ticular channel on port 2) and back again is easy. At the command prompt, you
enter the stream switch character (default is “|”, but you can change it) followed
by the number of the port you want to switch to, followed by the channel you
want to go to on that port.
For example, to switch to channel a on port 2, connect to another station and dis-
connect:
Step 1. At the “ cmd: ” prompt, type |2a and press the enter
key ,
Step 2. Now you are on port 2, channel a. From here, issue a
connect command, such as “cmd: C WØXI” and carry
on a communication with station WØXI,
Step 3. To disconnect (and remain on Port 2), issue the
disconnect command, “cmd: D”.
+ See the Command Reference for descriptions of all commands, including which
ones can be used to control port 1 and/or port 2 (i.e., multi-port commands).
Other Topics
As you begin working with your KPC-9612 Plus packet radio station, other top-
ics that you may wish to explore (with the help of other sections of this manual)
include:
•
doing hard and soft resets,
•
communicating via relays with a distant station,
•
using network nodes, and
Getting Started Switch from Port 1 to Port 2
User’s Guide 104 KPC-9612 Plus v 8.2