Technical and safety information
Models:
Unipi Patron S107, S117, S167, S207, M207, M267, M527, M567, L207, L527
PLEASE RETAIN THIS DOCUMENT FOR FUTURE REFERENCE
WARNING
The unit can be powered only by a power source in compliance with the unit’s specifications. Using an unsuitable power
supply can result in damage to the unit or connected devices. Unplug all power supplies and voltage sources before
any manipulation with the unit – danger of electrical injury or component damage!
Do not use the controller in potentially explosive environments! The controller can be installed only by trained personnel
with sufficient qualification. The unit can be installed only in a suitable environment following the product’s technical
specifications (indoor space with suitable temperature and humidity, waterproof distribution boxes, etc.).
All connected peripherals should comply with all standards and regulations relevant to the country and the intended
use.
Working conditions
Compliance information
Unipi Patron complies with the requirements
of EMC, LVD and RoHS regulations relevant
for European Union states.
WEEE Directive Statement for the European Union
Unipi Patron units cannot be disposed of as household
waste. Different rules for handling electric waste may
apply in other jurisdictions.
Power supply (SELV)
24 V DC
Ingress protection
(IEC 529)
IP20
Power consumption
Max: 12 - 20 W (see the
unit’s datasheet)
Working and storage
temperature
Working: 0 °C .. +55 °C
Storage: -25°C .. +70°C
Power supply
pole reversal protection
Ano
Installation
On a 35mm DIN rail in a
distribution box
(holder included)
General info
www.unipi.technology
Technical support, Knowledge Base
Analog I/O
Digital inputs
RS485 #1
2x USB 2.0
100Mbit ETH
+24V DC
1-Wire bus
Customizable LEDs
RS485 #2
Digital outputs
RS232
