IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части

Страница: 54 / 386

Note
An x value that follows an error code represents any
alphanumeric character.
Table 2 (Page 1 of 3). Ethernet controller messages
Error Code
Description
RPL-ROM-ERR: 100
The integrated Ethernet controller cannot be found.
RPL-ROM-ERR: 101
The integrated Ethernet controller was unable to initialize.
RPL-ROM-ERR: 102
The integrated Ethernet controller could not be reset.
RPL-ROM-ERR: 103
There are multiple Ethernet controllers or adapters in the
system. Specify the correct serial number in the NET.CFG
file.
RPL-ROM-ERR: 104
The integrated Ethernet controller EEPROM is faulty or not
present.
RPL-ROM-ERR: 106
The integrated Ethernet controller is configured for Plug and
Play in a non-Plug and Play system.
RPL-ROM-ERR: 110
The integrated Ethernet controller RAM failed the memory
test.
E61
Service boot (startup) canceled; that is, the boot diskette
image was not downloaded from the network.
E62
Cannot initialize controller.
E63
Cannot initialize controller.
E67
Cannot initialize controller.
E6d
Cannot find boot protocol (BOOTP) server.
E6e
Cannot start from downloaded image.
E71
Too many multicast trivial file transfer protocol (MTFTP)
packages.
M10
Address resolution protocol (ARP) canceled by keystroke.
M11
ARP timeout.
M20
Cannot copy memory.
M21
Cannot write to memory.
46
Netfinity Server HMM