IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части, Страница: 164 / 386

6. Press Enter; then, copy the IPSMON.EXE file to the
hard disk drive by typing one of the following at the
command prompt:
Ÿ
For OS/2, type:
copy a:\os2\ipsmon.exe c:\ipsadm
Ÿ
For Windows NT, type:
copy a:\nt\ipsmon.exe c:\ipsadm
Ÿ
For NetWare, type:
copy a:\netware\ipsmon.nlm c:\nwserver
Notes
1. The a represents the drive assignment
for the diskette drive that contains the
ServeRAID diskette.
2. The c represents the drive where OS/2,
Windows NT, or NetWare is installed.
3. These instructions assume that you
installed NetWare in the NWSERVER
directory.
7. Press Enter; then, refer to “Starting the ServeRAID
Administration and Monitoring Program” on page 98
for information to start and use the IPSSEND and
IPSMON programs.
Installing IPSSEND and IPSMON for
OpenServer:
To install these programs for OpenServer 5.0.X:
1. Insert the IBM ServeRAID Command Line Programs
Diskette into the diskette drive.
2. Copy the program files from the IBM ServeRAID
Command Line Programs Diskette by typing the
following:
doscp –r a:/openserv/ipssend /usr/bin/ipssend
3. Press Enter; then, type:
doscp –r a:/openserv/ipsmon /usr/bin/ipsmon
4. Press Enter; then, change the access permissions by
typing the following:
chmod 7ðð /usr/bin/ipssend
5. Press Enter; then, type:
chmod 7ðð /usr/bin/ipsmon
6. Press Enter; then, refer to “Starting the ServeRAID
Administration and Monitoring Program” on page 98
for information to start and use the IPSSEND and
IPSMON programs.
156
Netfinity Server HMM