IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части, Страница: 37 / 386

When this choice is enabled, System Security appears on
the limited Configuration/Setup Utility menu. The System
Security menu contains the Power-on Password choice.
Start options:
Start options take effect when you start the server.
You can select keyboard operating characteristics, such as
the keyboard speed. You also can specify whether the
keyboard number lock starts on or off. You also can
enable the server to run in disketteless and monitorless
operation.
The server uses a startup sequence to determine the
device from which the operating system loads. For
example, you can define a startup sequence that checks
for a startable diskette in the diskette drive, then checks
the hard disk drive in bay 1, and then checks a network
adapter.
You can enable a virus-detection test that checks for
changes in the master boot record at startup. You also
can choose to run POST in the enhanced mode or the
quick mode.
Select Start Options; then, use the Left Arrow (
←
) or
Right Arrow (
→
) key to advance through each data field.
The Start Options choice appears only on the full
Configuration/Setup Utility menu.
Advanced setup:
Select Advanced Setup to change values for advanced
hardware features, such as cache control, ROM
shadowing, and PCI bus control.
A warning message displays above the choices on this
menu, to alert you that the system might malfunction if
these options are configured incorrectly. Follow the
instructions on the screen carefully.
Use the Left Arrow (
←
) or Right Arrow (
→
) key to scroll
through each data field after you select one of the setup
options.
The Advanced Setup choice appears only on the full
Configuration/Setup Utility menu.
Core chip set control:
Select this choice to change
settings for the bridge chips in the server.
Cache control:
Select this choice to enable or disable
the microprocessor caches. In addition, you can define the
microprocessor cache mode as write-back (WB) or
write-through (WT).
Netfinity 5500 M20 - Type 8662
29