IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части

Страница: 181 / 386

Battery replacement
IBM has designed this product with your safety in mind.
The lithium battery must be handled correctly to avoid
possible danger. If you replace the battery, you must
adhere to the following instructions.
Caution
When replacing the battery, use only IBM FRU
Number 33F8354 or an equivalent type battery
recommended by the manufacturer. If the system has
a module containing a lithium battery, replace it only
with the same module type made by the same
manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
Ÿ
Throw or immerse into water
Ÿ
Heat to more than 100°C (212°F)
Ÿ
Repair or disassemble
Dispose of the battery as required by local ordinances
or regulations.
Note
In the U.S., call 1-800-IBM-4333 for information about
battery disposal.
If you replace the original lithium battery with a
heavy-metal battery or a battery with heavy-metal
components, be aware of the following environmental
consideration. Batteries and accumulators that contain
heavy metals must not be disposed of with normal
domestic waste. They will be taken back free of charge by
the manufacturer, distributor, or representative, to be
recycled or disposed of in a proper manner.
Notes
Ÿ
Read “Safety information” on page 340.
Ÿ
Follow any special handling and installation
instructions supplied with the replacement
battery.
Ÿ
After you replace the battery, you must
reconfigure the server and reset the system date
and time.
To replace the battery:
1. Turn off the server and peripheral devices and
disconnect all external cables and power cords (see
Netfinity 5500 M20 - Type 8662
173