IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части, Страница: 124 / 386

indicates that it is not responding.) If there is more than
one ServeRAID adapter or controller in the system,
selectce on the appropriate adapter or controller to make it
active.
You can then monitor the status by clicking on the active
adapter button on the Main screen of the Administration
and Monitoring Program.
Note
You might need to use the scroll bar and scroll down
to see all of the items that appear on this screen.
Descriptions of the information that appears on the screen
are as follows:
Adapter Number The active adapter or controller (1
to 8).
Number of Logical Drives The number of defined logical
drives (0 to 8).
Unattended Mode Off - The user chooses the
recovery method when there is a
ServeRAID startup error.
On - The adapter or controller
chooses the recovery method when
there is a ServeRAID startup error.
Code Block Version The current version number of the
firmware loaded on the adapter or
controller.
Boot Block Version The current version number of the
bootable microcode loaded on the
adapter or controller.
Concurrent Commands The maximum number of
concurrent commands supported.
Maximum Devices Supported The maximum number of
devices supported.
Flash Program Count The current number of times the
flash EEPROM has been written.
Defunct Disk Count The current number of defunct hard
disk drives.
Rebuild Rate The current setting (Low, Medium,
or High) of the rebuild rate.
Hot-Swap Rebuild The current state (Enabled or
Disabled) of the hot-swap rebuild
feature.
Offline Logical Drive Count The current number of offline
logical drives.
Configuration Update Count The number of times that
the ServeRAID configuration has
been updated.
NVRAM Battery Backup Device The current state of the
battery-backup cache (installed, not
installed, or defective).
116
Netfinity Server HMM