IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части

Страница: 107 / 386

4. Device Area Displays the state of each device
connected to the physical channels of the
ServeRAID adapter or controller, and if
applicable, its array identifier.
5. Status Bar Displays help for the area where the cursor
is currently pointing. Also displays the date
and time.
6. Status Window Displays messages regarding the
operational status of each adapter or
controller.
7. Logical Drive Area Displays the number of logical
drives created and the status of the logical
drive.
8. Adapter Area Displays the number and status of the
installed ServeRAID adapters and controllers
To start the WIN32-Based Administration and Monitoring
Program:
1. Do one of the following:
Ÿ
Select the IBM ServeRAID Administration icon
or
Ÿ
Select IBM ServeRAID Administration from the
Start menu.
2. The Administration and Monitoring Program starts in
stand-alone mode. After this program loads, you can
access the ServeRAID adapters and controllers.
When the Main window appears:
Ÿ
If you are running the program in the stand-alone
mode and you have ServeRAID adapters or
controllers installed in the system, the current
settings of the installed adapters or controllers
will appear on the screen.
Ÿ
If you are running the program from a client with
no ServeRAID adapters or controllers, a
message will appear stating that no ServeRAID
adapters or controllers are installed in the
system.
3. To access the server that contains the ServeRAID
adapters or controllers, select Network Settings from
the Options menu.
4. When the window appears prompting for Stand-alone
or Client/Server, select the Client/Server button.
5. In the edit box, type in the host name of the server
that you want to access.
or
Select the host name from the pull-down list; then,
select Connect.
Note
If security is enabled on the server, you must
enter a valid user name and password.
Netfinity 5500 M20 - Type 8662
99