IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части, Страница: 154 / 386

2. Insert the ATAPI BTLD diskette when prompted; then,
press r to replace the wd driver.
The fields for the ATAPI CD-ROM are:
Srom=wd(
c,d,l,b) where:
c = primary (0) or secondary (1) IDE/EIDE
controller
d = master (0) or slave (1) device
l = LUN of device (always 0 with ATAPI or wd
driver)
b = BUS of device (always 0 with ATAPI or wd
driver)
Installing the files for OpenServer 5.0.2 and
5.0.4:
To install files for OpenServer Versions 5.0.2 or
5.0.4 using an IDE CD-ROM drive:
1. Type the following at the
BOOT
prompt:
restart link=ipsraid Srom=wd(ð,ð,ð,ð)
Note
The ATAPI BTLD (which includes the
wd driver)
is included in OpenServer 5.0.2 and 5.0.4.
The fields for the ATAPI CD-ROM are:
Srom=wd( c,d,l,b) where:
c = primary (0) or secondary (1) IDE/EIDE
controller
d = master (0) or slave (1) device
l = LUN of device (always 0 with ATAPI or "wd"
driver)
b = BUS of device (always 0 with ATAPI or "wd"
driver)
2. Let the system start normally until it comes to the
select Media options.
Ÿ
If you are using OpenServer 5.0.2, go to step 3.
Ÿ
If you are using OpenServer 5.0.4, go to step 4.
3. To install with OpenServer 5.0.2:
a. Select Adapter type as WD.
b. Select Media Type as SCSI CD-ROM.
c. Select ID, BUS and LUN as 0.
d. Go to step 5.
4. To install with OpenServer 5.0.4:
a. Select Media Type as IDE CD-ROM Drive.
b. Select Primary Adapter and Master Device.
c. Go to step 5.
5. You have completed the installation.
Installing ServeRAID device drivers for
UnixWare:
The instructions for installing the ServeRAID files when
using UnixWare depend on the number of IDE and SCSI
disk-storage adapters and controllers installed in the
system. If all of the direct-access-storage devices (DASD)
146
Netfinity Server HMM