IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части

Страница: 66 / 386

Note
The default username and password is case
sensitive. You must use all caps, and the
“0” in PASSW0RD, is the numeral zero.
Ÿ
A username and password that you define using
the Advanced System Management service and
Netfinity Manager
Important
If you update the Netfinity Advanced System
Management Processor microcode, the default
username (USERID) and password
(PASSW0RD) are reset. If applicable, notify the
system administrator.
When you have logged into the Netfinity Advanced
System Management Processor, the following main
menu appears:
2 Monitors
3 Error Logs
4 Service Processor Configuration
5 System Services
6 System Power
7 Boot
B Remote Terminal Status
Y Disconnect Current Logon
Z Start Remote Video
3. Select 7 Boot.
The following Boot menu appears:
1 Reboot w/OS Shutdown
2 Reboot immediately
3 Restart SP
4. Select a Boot menu item.
Ÿ
Select 1 Reboot w/OS Shutdown to shutdown
the server operating system and then restart the
server.
Ÿ
Select 2 Reboot immediately to restart the
server immediately, without first shutting down
the operating system.
Ÿ
Select 3 Restart SP to restart the Netfinity
Advanced System Management Processor.
Using remote video mode to monitor and access
POST:
You can use a terminal program to remotely
monitor all textual output generated during POST. All
POST data will be displayed in the terminal program
window as the remote system completes POST. While
you are monitoring POST on the remote system, all local
keystrokes are relayed automatically to the remote system,
enabling you to use POST utilities (such as system
configuration, RAID Mini-Configuration program, or
diagnostic programs) that can be accessed during POST.
58
Netfinity Server HMM