IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части

Страница: 62 / 386

in the terminal program window as the remote system
completes POST. While you are monitoring POST on the
remote system, all local (terminal program) keystrokes are
relayed automatically to the remote system, enabling you
to use POST utilities (such as system configuration, RAID
Mini-Configuration program, and diagnostic programs) that
can be accessed during POST.
To use a terminal program to establish a connection with
the Netfinity Advanced System Management Processor:
1. Use a terminal program to establish a connection with
the Netfinity Advanced System Management
Processor modem. The modem settings you should
use are:
Baud
57.6 k
Data Bits 8
Parity None
Stop Bits 1
Flow Control Hardware
2. Log in to the Netfinity Advanced System Management
Processor.
When you have established a connection with the
Netfinity Advanced System Management Processor,
you will be prompted for a username and password.
You must provide a username and password
combination that has been previously configured for
use with the Netfinity Advanced System Management
Processor. You can use one of two username and
password combinations:
Ÿ
The default username (USERID) and password
(PASSW0RD)
Note
The default username and password is case
sensitive. You must use all caps, and the
“0” in PASSW0RD is the numeral zero.
Ÿ
A username and password that you define using
the Advanced System Management service and
Netfinity Manager
Important
If you update the Netfinity Advanced System
Management Processor microcode, the default
username (USERID) and password
(PASSW0RD) are reset. If applicable, notify the
system administrator.
When you have logged into the Netfinity Advanced System
Management Processor, the following main menu appears:
54
Netfinity Server HMM