IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части

Страница: 276 / 386

3. Lift and position the server so that the bayonet slots
on the server are above the bayonets on the
slide-bracket assemblies.
4. Lower the server and slip the bayonets into the
bayonet slots.
5. Insert screws through one slide-bracket assembly and
server side. Tighten the screws. Repeat this step for
the other slide-bracket assembly on the opposite side
of the server. This secures the server.
6. Remove the four lift handles from the sides of the
server:
a. Grasp the lift handle and press in on the sides of
the lift handle near the tabs until the tabs touch
the inside edges of the slots.
b. Move the handle down in the slots so that the
hooked parts of the tabs clear the top edges of
the slots; then, pull the handle away from the
server.
c. Remove the remaining three handles. Store the
handles in a safe place.
Note
When the drawer is fully extended, safety latches
on the slide-brackets lock into place. To release
the safety latch, press the latch on each side of
the rack.
7. Press the safety latches and slide the drawer about
halfway into the rack.
268
Netfinity Server HMM