IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части

Страница: 145 / 386

Note
The a represents the drive assignment for the
diskette drive that contains the ServeRAID
diskette.
6. Press Enter. Then, type:
cd netware
7. Press Enter. Then, type:
install
8. Press Enter. Then, follow the instructions that
appear on the screen to complete the ServeRAID
device driver and program installation.
Installing the files after installing NetWare 3.12:
The ServeRAID device driver for NetWare, IPSRAID.HAM,
is in the NetWare directory on the
IBM ServeRAID Device
Driver Diskette. You can use the INSTALL.BAT file, which
is also in the NetWare directory on the diskette, to copy all
of the required files to the server directory. The
INSTALL.BAT file will modify the STARTUP.NCF file so
that it will load the required NetWare modules.
Use the instructions provided in the NetWare 3.12 manual
along with the following instructions to install the
ServeRAID device driver, background-server component,
and Administration and Monitoring Program files after
installing NetWare, Version 3.12.
1. Use the ServerGuide Diskette Factory to create an
IBM ServeRAID Device Driver Diskette.
2. Insert the
IBM ServeRAID Device Driver Diskette into
the diskette drive.
3. Go to the default NetWare 3.12 directory. To do this,
type:
cd\server.312
Note
The SERVER.312 is the default NetWare 3.12
directory. If you are using a different path, be
sure to specify the same path throughout the
installation process.
4. Press Enter; then, from the operating system prompt
in the SERVER.312 directory, type:
a:
Note
The a represents the drive assignment for the
diskette drive that contains the ServeRAID
diskette.
5. Press Enter. Then, type:
cd netware
Netfinity 5500 M20 - Type 8662
137