IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части

Страница: 81 / 386

IBM ServeRAID Configuration Program - [Configure the ServeRAID Controller]
File View Actions Help
Express Configuration for Controller 1
Custom Configuration for Controller 1
Select this choice to configure your ServeRaid
controller automatically.
Select this choice to configure your ServeRaid
controller manually.
< Back Next > Cancel Help
07/09/1998 7:37:51 PM The program found 1 ServeRAID controllers.
07/09/1998 7:37:51 PM The IBM ServeRAID Configuration Program started.
Configuration Paths
? X
IBM Server (BEST SERVER)
Controller 1 (not configured)
This program will guide you through the configuration of your ServeRAID
controller. You must configure each controller before you can use it.
To begin the configuration process, select a controller from the tree on
the left and select 'Express' or 'Custom' configuration path below;
then, click on the 'Next' button.
Select the Cancel button to switch from the
Configuration mode to the Information mode. all
ServeRAID controllers in the server are
configured, the program starts in the Information
mode and a screen similar to the following
appears.
IBM ServeRAID Configuration Program - [Controller 1 Information]
File View Actions Help
ServeRAID Controller Information
07/09/1998 7:37:51 PM The program found 1 ServeRAID controllers.
07/09/1998 7:37:51 PM The IBM ServeRAID Configuration Program started.
? X
IBM Server (BEST SERVER)
Controller 1
Description or Value
Controller Number
Firmware Version
Read-Ahead Cache Mode
Stripe-Unit Size
Rebuild Rate
Hot-Swap Rebuild
Data Scrubbing
Auto-Synchronization
Number of Arrays
Number of Logical Drives
Number of Hot-Spare Drives 1
3.00.00
Enabled
8 K
High
Enabled
Enabled
Enabled
2
2
0
Select the icon on the Tool Bar to
switch from the Information mode to the
Configuration mode.
2. Continue with one of the following:
Ÿ
“Configuration mode”
Ÿ
“Information mode” on page 78
Configuration mode:
You can use the Configuration mode to create up to eight
independent disk arrays for each ServeRAID controller.
The Configuration mode provides two configuration paths:
Express Configuration and Custom Configuration.
Netfinity 5500 M20 - Type 8662
73