IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части

Страница: 31 / 386

4. After making changes, you can select:
Ÿ
Save Settings to save the selected changes.
Ÿ
Restore Settings to delete the changes and
restore the previous settings.
Ÿ
Load Default Settings to cancel the changes
and restore the factory settings.
5. To exit from the Configuration/Setup Utility main
menu, select Exit Setup. If you made any changes
and did not save them with the Save Settings choice,
the system prompts you to save or discard the
changes when you attempt to exit from the
Configuration/Setup Utility main menu.
System summary:
Select this choice to display configuration information,
including the type and speed of the microprocessor and
amount of memory.
Changes that you make to configuration settings appear on
this summary screen. You cannot edit the fields.
The System Summary choice appears on the full
Configuration/Setup Utility menu and on the limited
Configuration/Setup Utility menu.
System information:
Select this choice to display information about the Netfinity
5500 M20, and to view the IRQ settings for the RAID and
Ethernet controllers on the system board, and other PCI
adapters that you purchase and install.
Changes that you make on other menus might appear on
this summary screen. You cannot edit any fields.
The System Information choice appears only on the full
Configuration/Setup Utility menu.
Product data:
Select this choice to view system
information, such as the machine type and model, the
system serial number, the system board identifier, and the
revision level or issue date of the flash electronically
erasable programmable ROM (EEPROM) for the Netfinity
Advanced System Management Processor, diagnostics,
and BIOS.
System card data:
Select this choice to view
information for the system board and processor board.
PCI routing:
Select this choice to view the IRQ settings
for PCI adapters and for the Ethernet, SCSI, and other
controllers on the system board. See “PCI bus control” on
page 30 for information about changing the PCI IRQ
settings.
Netfinity 5500 M20 - Type 8662
23