IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части, Страница: 59 / 386

1. Check the VRM Error LEDs on the
processor board.
2. Turn off the server, reseat the VRM
indicated by the lit VRM Error LED,
and restart the server.
3. If the problem persists, replace the
VRM.
4. Replace microprocessor for that
VRM and the companion VRM (see
“Processor board component
locations” on page 254.)
5. Replace processor board.
If the problem persists, go to “General
checkout” on page 8.
– CPU LED on
One of the microprocessors has failed.
Actions:
1. Check the Microprocessor Error
LEDs on the processor board. Also,
if possible, check the System Error
Log for additional information. If
temperature problems are indicated
in the log, check fans.
2. Turn off the server, reseat the
microprocessor indicated by the lit
Microprocessor Error LED, and
restart the server.
3. If the problem persists, replace the
microprocessor.
4. Replace both VRMs for that
microprocessor. (see “Processor
board component locations” on
page 254.)
5. Replace processor board.
If the problem persists, go to “General
checkout” on page 8.
– PS1 LED on
The primary power supply has failed.
Action: Replace the primary power supply.
– PS2 LED on
The secondary power supply has failed.
Action: Replace the secondary power supply.
– DASD 1 LED on
A hot-swap hard disk drive has failed on SCSI
RAID channel 1.
Actions:
1. Check the error log for additional
information. If the error log
indicates a temperature problem
and the fans are working correctly,
Netfinity 5500 M20 - Type 8662
51