IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части

Страница: 149 / 386

Note
The a represents the drive assignment for the
diskette drive that contains the ServeRAID
diskette.
8. Press Enter. Then, type:
ddinstal
9. Press Enter.
The OS/2 Device Driver Installation window will
appear and prompt you for the source and destination
drives. The source directory shows where to insert
the
IBM ServeRAID Device Driver Diskette. The
destination directory shows where the program will
copy the device driver files.
10. Select Install.
Ÿ
The program copies the following ServeRAID
device driver and program files to the OS/2
subdirectory on the hard disk: IPSRAID.ADD,
IPSADM.EXE, and IPSRADM.EXE.
Ÿ
The program copies the ServeRAID
IPSRADM.HLP Help file to the \OS2\HELP
directory.
11. Edit the CONFIG.SYS file and verify that there is only
one copy of the line BASEDEV=IPSRAID.ADD.
Notes
1. If you have more than one ServeRAID or
SCSI adapter in the system, make sure that
the BASEDEV statement for the adapter
controlling the startup (boot) device appears
before the BASEDEV statements for other
ServeRAID or SCSI adapters in the
CONFIG.SYS file.
2. After you install any service packs, check
the path for the IPSRAID.ADD device driver
and verify that the correct device driver is
installed.
12. Restart the server.
Installing the files after installing OS/2:
You can
use the following instructions to install the ServeRAID
device driver and Administration and Monitoring Program
files after installing OS/2 Warp Server.
To install the ServeRAID files after installing OS/2:
1. Use the ServerGuide Diskette Factory to create an
IBM ServeRAID Device Driver Diskette.
2. After you complete the OS/2 installation, insert the
IBM ServeRAID Device Driver Diskette.
3. From an OS/2 window, type:
a:
Netfinity 5500 M20 - Type 8662
141