IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части, Страница: 135 / 386

Supported operating systems: DOS
Command:
IPSSEND STARTDELY
Controller Options
Replace:
Ÿ
Controller with the ServeRAID controller
number (1 to 8)
Ÿ
Options with a question mark (?) to
display concurrent drive startup count:
Drive Count (1 to 16) and Delay Time (3
to 15 seconds).
RAID configuration commands:
The IPSSEND RAID configuration commands include the
following:
DRIVEVER Use the DRIVEVER command to display the
vendor ID, microcode version, and serial
number of a SCSI device. The IPSSEND
program retrieves this information directly
from the device.
Supported operating systems: Windows NT,
OS/2, NetWare, OpenServer, UnixWare, and
DOS
Command:
IPSSEND DRIVEVER
Controller Channel SID
Replace:
Ÿ
Controller with the ServeRAID controller
number (1 to 8)
Ÿ
Channel with the channel number for the
device (1, 2, or 3)
Ÿ
SID with the SCSI ID for the device (0 to
15)
GETCONFIG Use the GETCONFIG command to display
the ServeRAID adapter or controller
configuration information. This includes
information about the firmware version;
initiator ID and rebuild rate; logical drive
status, RAID level, and size; and physical
device type, SCSI ID, and PFA error.
Supported operating systems: Windows NT,
OS/2, NetWare, OpenServer, UnixWare, and
DOS
Command:
IPSSEND GETCONFIG
Controller Options
Replace:
Ÿ
Controller with the ServeRAID controller
number (1 to 8)
Ÿ
Options with one of the following: AD
for adapter or controller information, LD
for logical drive information, PD for
physical device information, AL (default)
for all information.
Netfinity 5500 M20 - Type 8662
127