IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части, Страница: 147 / 386

4. Insert the IBM ServeRAID Device Driver Diskette into
the diskette drive.
5. Select Driver options from the Installation Options
list.
6. Select Configure disk and storage from the Driver
Options pop-up window.
7. Select Select an additional driver from the
Additional Drivers Actions pop-up window.
8. When the next screen appears, press the Ins key to
install an unlisted driver.
9. When the next screen appears, press the F3 key to
specify a different path.
10. In the Specify a directory path field, type:
a:\netware
11. When prompted to select a driver to install, select
IPSRAID.HAM.
12. Select Yes when prompted to copy the IPSRAID.HAM
driver.
13. When the prompt appears to specify the server boot
path, type:
c:\nwserver
Notes
1. This instruction assumes that you installed
NetWare in its default directory. If you did
not install NetWare in the NWSERVER
directory on drive C, modify step 13
accordingly.
2. If any of the files you are installing already
exist on the server, NetWare will prompt you
to save the older files. Although it is not
necessary to save the older files, it usually
is a good idea.
14. After the installation program copies all files, you can
edit parameters (such as the ServeRAID slot number)
from the Driver IPSRAID Parameter Actions screen.
15. After you edit the parameters, select Save
Parameters and load driver to load the ServeRAID
device driver.
16. Press Esc to exit the installation screens.
Note
If you want NetWare to load the ServeRAID device
driver automatically during startup, you must add the
appropriate LOAD command (for example,
load
ipsraid.ham slot=1
) to the NetWare startup command
file (usually C:\NWSERVER\STARTUP.NCF).
Netfinity 5500 M20 - Type 8662
139