IBM 866251Y - Netfinity 5500 M20, Руководство по техническому обслуживанию аппаратной части, Страница: 67 / 386

To use Remote Video Mode to monitor and access POST
on the server:
1. Use a terminal program to establish a connection with
the Netfinity Advanced System Management
Processor modem.
2. Log in to the Netfinity Advanced System Management
Processor.
When you have established a connection with the
Netfinity Advanced System Management Processor,
you will be prompted for a username and password.
You must provide a username and password
combination that has been previously configured for
use with the Netfinity Advanced System Management
Processor. You can use one of two username and
password combinations:
Ÿ
The default username (USERID) and password
(PASSW0RD)
Note
The default username and password is case
sensitive. You must use all caps, and the
“0” in PASSW0RD, is the numeral zero.
Ÿ
A username and password that you define using
the Advanced System Management service and
Netfinity Manager
Important
If you update the Netfinity Advanced System
Management Processor microcode, the default
username (USERID) and password
(PASSW0RD) are reset. If applicable, notify the
system administrator.
When you have logged into the Netfinity Advanced
System Management Processor, the following main
menu appears:
2 Monitors
3 Error Logs
4 Service Processor Configuration
5 System Services
6 System Power
7 Boot
B Remote Terminal Status
Y Disconnect Current Logon
Z Start Remote Video
3. Start (or restart) the server.
Ÿ
If the remote server is currently powered off:
a. Select 6 System Power from the main
menu.
b. Select 4 Power On from the System Power
menu.
Ÿ
If the server is currently powered on, you must
restart the server. You can use selections from
Netfinity 5500 M20 - Type 8662
59