background image

Welcome.

Thank you for buying an
IBM server.

This server
contains information for setting
up and configuring your server.

For detailed information about
your server, view the publications
on the

You can also find the most
current information about
your server at:
http://www.ibm.com/servers
/eserver/support/xseries/index.html/.

Your server

is based on the X-Architecture
technology, and it features
superior performance, availability,
and affordability.

Documentation CD.

Installation Guide

Installation Guide

System x3400

Types 7973, 7974,

7975, and 7976

Turn off the server
and install options.

Did the server

start correctly?

Yes

No

Go to the Server Support

flow chart on the reverse

side of this page.

Start the server.

Did the server

start correctly?

Yes

No

Cable the server and options;

then, restart the server.

Was the

server setup

completed?

Use

ServerGuide to

install the operating

system?

The server is ready to use.

Go to

to register the server.

http://www.ibm.com/support/mysupport/

Go to the Web for instructions:

http://www.ibm.com/support/

No

Yes

Yes

No

Use the IBM

ServerGuide   program

to set up and

configure hardware.

Go to the Server Support

flow chart on the reverse

side of this page.

Install applications,
such as IBM systems
management software
and IBM ServeRAID
programs

Содержание System x3400 Type 7975





























































































































Отзывы: