HP E4510-48G, Справочник по командам

Страница: 439 / 1334

3-5
Field Description
Default route cost Cost of the default route
Verify-source
Indicates whether the source IP address is checked on
the received RIP routing updates
Networks Networks enabled with RIP
Configured peers Configured neighbors
Triggered updates sent Number of sent triggered updates
Number of routes changes Number of changed routes in the database
Number of replies to queries Number of RIP responses
display rip database
Syntax
display rip process-id database
View
Any view
Default Level
1: Monitor level
Parameters
process-id : RIP process ID, in the range of 1 to 65535.
Description
Use the display rip database command to display active routes in the database of the specified RIP
process, which are sent in normal RIP routing updates.
Examples
# Display the active routes in the database of RIP process 100.
<Sysname> display rip 100 database
10.0.0.0/8, cost 1, ClassfulSumm
10.0.0.0/24, cost 1, nexthop 10.0.0.1, Rip-interface
11.0.0.0/8, cost 1, ClassfulSumm
11.0.0.0/24, cost 1, nexthop 10.0.0.1, Imported
Table 3-2 display rip database command output description
Field Description
X.X.X.X/X Destination address and subnet mask
cost Cost of the route
classful-summ Indicates the route is a RIP summary route.
Nexthop Address of the next hop