HP E4510-48G, Справочник по командам

Страница: 469 / 1334

5-4
Parameters
process-id : RIPng process ID, in the range of 1 to 65535.
Description
Use the display ripng database command to display all active routes in the advertising database of
the specified RIPng process, which are sent in normal RIPng update messages.
Examples
# Display the active routes in the database of RIPng process 100.
<Sysname> display ripng 100 database
2001:7B::2:2A1:5DE/64,
cost 4, Imported
1:13::/120,
cost 4, Imported
1:32::/120,
cost 4, Imported
1:33::/120,
cost 4, Imported
100::/32,
via FE80::200:5EFF:FE04:3302, cost 2
3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B602, cost 2
3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B601, cost 2
3FFE:C00:C18:2::/64,
via FE80::200:5EFF:FE04:B602, cost 2
3FFE:C00:C18:3::/64,
via FE80::200:5EFF:FE04:B601, cost 2
4000:1::/64,
via FE80::200:5EFF:FE04:3302, cost 2
4000:2::/64,
via FE80::200:5EFF:FE04:3302, cost 2
1111::/64,
cost 0, RIPng-interface
Table 5-2 display ripng database command output description
Field Description
2001:7B::2:2A1:5DE/64 IPv6 destination address/prefix length
via Next hop IPv6 address
cost Route metric value
Imported Route redistributed from another routing protocol
RIPng-interface Route learned from the interface