HP E4510-48G, Справочник по командам

Страница: 69 / 1334

1-15
Field Description
PortName Abbreviated port name
Type
Type of the packets for which storm constrain function is enabled, which
can be broadcast (for broadcast packets), and multicast (for multicast
packets).
LowerLimit Lower threshold (in pps, Kbps or percentage)
UpperLimit Upper threshold (in pps, Kbps or percentage)
CtrMode
Action to be taken when the upper threshold is reached, which can be
block, shutdown, and N/A.
Status
Interface state, which can be normal (indicating the interface operates
properly), control (indicating the interface is blocked or shut down).
Trap
State of trap messages sending. “on” indicates trap message sending is
enabled; “off” indicates trap message sending is disabled.
Log
State of log sending. “on” indicates log sending is enabled; “off” indicates
log sending is disabled.
SwiNum
Number of the forwarding state switching.
This field is numbered modulo 65,535.
duplex
Syntax
duplex { auto | full | half }
undo duplex
View
Ethernet port view
Default Level
2: System level
Parameters
auto : Indicates that the interface is in auto-negotiation state.
full : Indicates that the interface is in full-duplex state.
half : Indicates that the interface is in half-duplex state. The optical interfaces of SFP ports and the
electrical interfaces of Ethernet ports whose port rate is configured as 1000 Mbps do not support the
half keyword.
Description
Use the duplex command to configure the duplex mode for an Ethernet port.
Use the undo duplex command to restore the duplex mode for an Ethernet port to the default.
By default, the duplex mode for an Ethernet port is auto .