HP E4510-48G, Справочник по командам

Страница: 1333 / 1334

22-8
Table 22-7 display ipc queue command output description
Field Description
QueueType
Queue type, including:
UNICAST: unicast queue
MULTICAST: multicast (including broadcast) queue
MIXCAST: mixcast queue, which can accommodate unicasts, multicasts and
broadcasts
QueueID Queue number
Dst-NodeID Peer node number. If no peer node exists, the field is displayed as “--”.
Length Queue length (namely, number of packets that can be cached)
FullTimes Times that the queue is full
Packet Total number of packets in the queue
ipc performance enable
Syntax
ipc performance enable { node node-id | self-node } [ channel channel-id ]
undo ipc performance enable [ node node-id | self-node ] [ channel channel-id ]
View
User view
Default Level
1: Monitor level
Parameters
node node-id : Enables IPC performance statistics of the specified node, where node-id represents the
number of the specified node, in the range of 0 to 9.
self-node : Enables IPC performance statistics of the local node.
channel channel-id : Enables IPC performance statistics information of the specified channel, where
channel-id represents the channel number, in the range of 0 to 159.
Description
Use the ipc performance enable command to enable IPC performance statistics. Use the undo ipc
performance command to disable IPC performance statistics.
By default, IPC performance statistics is disabled.
When IPC performance statistics is disabled, the statistics data does not change. In this case, if you
execute the display ipc performance command, the statistics data at the time when ICP performance
statistics was disabled.
Examples
# Enable IPC performance statistics of node 6 on channel 18 .
<Sysname> ipc performance enable node 6 channel 18