HP E4510-48G, Справочник по командам

Страница: 475 / 1334

5-10
Use the undo preference route-policy command to restore the default.
By default, the priority of a RIPng route is 100.
Using the route-policy keyword can set a priority for routes filtered in by the routing policy:
z
If a priority is set in the routing policy, the priority applies to matched routes, and the priority set by
the preference command applies to routes not matched.
z
If no priority is set in the routing policy, the one set by the preference command applies to all
routes.
Examples
# Set the RIPng route priority to 120.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] preference 120
# Restore the default RIPng route priority.
[Sysname-ripng-100] undo preference
ripng
Syntax
ripng [ process-id ]
undo ripng [ process-id ]
View
System view
Default Level
2: System level
Parameters
process-id : RIPng process ID, in the range of 1 to 65535. The default value is 1.
Description
Use the ripng command to create a RIPng process and enter RIPng view.
Use the undo ripng command to disable a RIPng process.
By default, no RIPng process is enabled.
Examples
# Create RIPng process 100 and enter its view.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100]
# Disable RIPng process 100.
[Sysname] undo ripng 100