HP E4510-48G, Справочник по командам

Страница: 888 / 1334

3-18
View
RRPP domain view
Default Level
2: System level
Parameters
hello-value : Hello timer value, in the range 1 to 10 seconds.
fail-value : Fail timer value, in the range 3 to 30 seconds.
Description
Use the timer command to configure the Hello timer value and the Fail timer value for the RRPP
domain.
Use the undo timer command to restore it to the default value.
By default, the Hello timer value is 1 second and the Fail timer value is 3 seconds.
Note that the Fail timer value must be greater than or equal to three times of the Hello timer value.
Examples
# Set the Hello timer value to 2 seconds and the Fail timer value to 7 seconds.
<Sysname> system-view
[Sysname] rrpp domain 1
[Sysname-rrpp-domain1] timer hello-timer 2 fail-timer 7