HP E4510-48G, Справочник по командам

Страница: 1327 / 1334

22-2
26 Prehistorical channel, NO.8
27 FIB4
32 Prehistorical channel, NO.3
33 Prehistorical channel, NO.11
34 Prehistorical channel, NO.9
35 IPC test channel
37 Prehistorical channel, NO.12
43 Prehistorical channel, NO.14
45 Prehistorical channel, NO.5
53 Prehistorical channel, NO.13
62 Prehistorical channel, NO.10
Table 22-1 display ipc channel command output description
Field Description
ChannelID
Channel number, which has been predefined and assigned by the system. One
channel number corresponds to one module. The
display ipc channel
command displays the numbers of the current active modules.
Description
Description information, which is generated by the internal software of the
device, is used to describe the functions of a channel. For example, “FIB4”
indicates that the channel is used for Layer 3 fast forwarding; “Prehistorical
channel, NO.2” indicates that no description is defined for the channel, and the
channel is the second channel established.
display ipc link
Syntax
display ipc link { node node-id | self-node }
View
Any view
Default Level
1: Monitor level
Parameters
node node-id : Displays the link information of the specified node, where node-id represents the
number of the specified node, in the range of 0 to 9.
self-node : Displays the link status information of the local node.
Description
Use the display ipc link command to display the link status information of the specified node.
Examples
# Display link status information of the local node.
<Sysname> display ipc link self-node
Dst-NodeID LinkStatus
-------------------------------------------